Services · Basements

Sump Pump Installation for Homes Across the GTA

Weeping tile gathers groundwater around your footings and delivers it to a pit; the pump’s job is to lift that water outdoors before it forces its way through the slab.

Pointers on municipal flood-protection programs
Pit, pump, float and check valve tested together
Backwater valve options for the main drain

Call nowor dial (365) 387-8531

Rusted round floor drain grate in concrete — A rusted round floor drain in a concrete slab.

Diagnosis first, tested after

Licensed & insured: ask us
Camera before cutting
Water-tested repairs
Booked by phone

Signs it is time to call

Homes with high water tables, clay soils that hold water, or weeping tile that once drained into the sanitary sewer often need a sump. Disconnecting foundation drains from the sewer, which several GTA municipalities have encouraged, means that water needs a new place to go. Finishing a basement is another common trigger.

Damp walls after every heavy rain
Foundation drains disconnected from the sewer
Hydrostatic seepage through the floor slab
A finished basement that needs protecting

On the job, step by step

Choose the lowest practical spot near the weeping tile and away from finished walls.
Cut and dig the floor for a lidded pit, connecting the drainage tile to it.
Set a submersible pump with a vertical float that has room to travel.
Plumb the outlet with a check valve and a union, making later pump swaps a ten-minute job.
Discharge outside to a splash pad or approved location out on the lawn, never down a sewer opening.
Fill the pit from a garden hose and watch it cycle twice.

GTA houses and what they change

Clay soils common across much of the region drain slowly and keep pits busy. Discharge lines that run through walls need slope or freeze protection where they exit, or ice blocks them in January. Some municipalities have rules on where discharge may go, especially near property lines. Check yours.

Before you pick up the phone

Ask about pump horsepower relative to your inflow, whether a backup pump is worth adding, and where the discharge will run. Call (365) 387-8531.

Signs you need this

Sewage smell in the basement after rain
A past flood and no backwater valve on the main drain
Water at the floor drain or around the furnace after a heavy storm

What is included

Battery and charger testerConfirm a backup pump will actually run in an outage
Concrete saw and breakerOpening the floor for a backwater valve or new pit

Typical cause: Overwhelmed sewers, failed pumps, open laterals
Access point: Sump pit, main drain under the floor
Proof of fix: Water poured through, valve flap seen closing

Common questions

May the sump empty into the floor drain?

In most GTA municipalities, no. Pumping groundwater into the sanitary sewer is prohibited in many municipalities and defeats the purpose during a storm.